|
Product Details:
|
| Manufacturer: | Bitmain | Model: | Antminer L7 |
|---|---|---|---|
| Release: | November 2021 | Size: | 195 X 290 X 400mm |
| Weight: | 15500g | Noise Level: | 75db |
| Fan(s): | 4 | Power: | 3425W |
| Interface: | Ethernet | Temperature: | 5 – 45 °C |
| Humidity: | 5 – 95 % |
Bitmain Antminer L7 comes with power supply attached, as with most 4th generation ASICs. The power supply does not come with the 2 power cords necessary however as they are regional spec. Every requires a2-pole 20 amp breaker circuit, feeding a 220-240v line. Power chords must be 10A 14-16AWG rates NEMA digital ballast type. There is no difference between the 9.16 and 9.5 rated models– they are essentially the same unit. Bitmain does not guarantee shipments of L7 capable of mining exactly 9.5GHs consistently. This figure is simply considered the high-end hashrate, with 9160 representing the low-end.
| Manufacturer | Bitmain |
|---|---|
| Model | Antminer L7 (9.5Gh) |
| Also known as | Antminer L7 9500Mh |
| Release | November 2021 |
| Size | 195 x 290 x 370mm |
| Weight | 15000g |
| Noise level | 75db |
| Fan(s) | 4 |
| Power | 3425W |
| Interface | Ethernet |
| Temperature | 5 – 45 °C |
| Humidity | 5 – 95 % |
Model Antminer L7 (9.5Gh) from Bitmain mining Scrypt algorithm with a maximum hashrate of 9.5Gh/s for a power consumption of 3425W.
Warranty Invalid:
1. Customer removes/replaces any components by himself without receiving permission from Bitmain first
2. Damage caused by poor power supply, lightning or voltage surges
3. Burnt parts on hash boards or chips
4. Miner/boards/components damage due to water immersion or corrosion due to wet environment
5. Over Clock
Contact Person: Elena Lee
Tel: 008618820170579
